Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Air Quality & Sanitizing Across Park Slope
If your Park Slope apartment smells musty every time the AC kicks on, the problem is usually not the air you can see. It’s the ductwork you can’t. Most homes here were never built with ducts at all, and the retrofit runs hidden in closets, soffits and joist bays are where mold, bacteria and odor settle in. We map those runs before we treat anything. We work across Park Slope and the surrounding blocks, and our air quality & sanitizing work starts with finding what’s actually live. Call (866) 937-8518. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Park Slope Homeowners Call Air Duct Cleaning Flatbush for Air Quality & Sanitizing
Park Slope homeowners call us because we treat a sanitizing job as a diagnostic one, and we say so up front. Our technicians have up to 14 years of experience, and the majority of that work has been in old buildings where the duct system is a retrofit, not a blueprint. That’s the difference between fogging a system and actually fixing the source.
We use Air Quality & Sanitizing equipment built for the job: Rotobrush and Nikro extraction systems, and Abatement Technologies negative-air containment so dislodged debris doesn’t recirculate into your living rooms while we work. Full-system scope matters here. When a run has pulled apart behind plaster, no amount of cleaning helps until the breach is sealed.
We know this housing stock. We know the smell that comes back three weeks after a treatment and what usually causes it. You get one flat price per system, agreed before work starts, with before-and-after photos of your own ducts so you can see what changed.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Our Air Quality & Sanitizing Services in Park Slope
Mold Treatment in Park Slope Brownstones
Mold in a Park Slope brownstone usually lives on the damp interior of an uninsulated retrofit run, not on your walls. Humid subtropical summers push warm, moist air into those runs, and when they condensate, the growth comes right back after a surface treatment. We confirm where the moisture is coming from, treat the coil and interior duct surfaces, and recommend insulating the run so it doesn’t re-seed.

Bacteria Sanitizing
Bacteria buildup inside a retrofit duct often traces to a dead leg of ductwork that no longer serves a register, sitting damp and disconnected in a joist bay. Sanitizing a live branch while treating the wrong one is a wasted job. We trace the system first, then apply an EPA-registered sanitizer to the surfaces that actually carry air into your rooms.

Odor Removal in Converted Multi-Unit Buildings
In a Park Slope rowhouse converted to two or three units, each apartment often has its own ad-hoc duct system pieced together over decades. Odor that seems to travel between floors usually does, through a shared chase or a shut-off register that still connects to a neighbor’s return. We map the connections and remove the source rather than masking it.

UV Light Installation
A UV light mounted at the air handler keeps the coil and the first stretch of duct cleaner between cleanings, which matters in a building where the coil sits in a tight closet. We size the installation to your air handler and the space you actually have. It’s a supplement to sealing and cleaning, not a replacement for either.
Allergen Reduction and Air Purifier Install
Spring pollen from Prospect Park and the street trees lands on registers and gets drawn straight back into the system. We assess filtration and install Honeywell and Aprilaire air-quality products sized to your retrofit air handler, so filtration actually improves instead of choking airflow in undersized returns.
Why Sanitizing a Park Slope Duct System Is a Tracing Job First
Almost no Park Slope brownstone was built with central HVAC. The buildings went up between roughly 1890 and 1930, decades before forced air was standard, so every duct system here is a retrofit threaded through closets, soffits and between-floor joist bays. In buildings converted to two or three units, each apartment often has its own decades-old patchwork of runs, and some of those runs no longer connect to any register at all. A sanitizing job here is less about fogging a system than about mapping which improvised run is actually live before you treat it.
Here’s how this usually plays out. A homeowner runs the AC through a humid summer and notices a musty smell in one room, with dust streaking from that register while the rest of the apartment stays clean. That pattern points to a run that was retrofit through a chase or a former dumbwaiter shaft and has pulled apart at a joint behind plaster. The air handler is moving, but that branch is pulling cavity air instead of conditioned air. A qualified tech typically starts with camera inspection to trace the disconnected or crushed section, confirms what the blower motor and air handler are actually serving, then uses negative pressure and HEPA filtration for source removal before sealing the breach and sanitizing the coil and duct interior. Because the compromised run is usually buried, the fix can mean opening a small access panel and patching plaster rather than simply running a vacuum.

The common failures repeat in predictable ways. A retrofit flex run separates at a joist bay, and no cleaning fixes it until the run is sealed. A shut-off register stops connecting to anything live, so treatment lands on the wrong branch while the odor sits in a dead leg. An uninsulated run condensates through heavy summer use and stays damp, re-seeding mold after treatment. Sealing and insulation are often the real repair, and cleaning is the step that comes after or alongside them.
Trusted Brands We Service in Park Slope
We work with Rotobrush and Nikro extraction systems, Abatement Technologies containment equipment, and Honeywell and Aprilaire air-quality products. We don’t stock parts or keep a local warehouse, so we source what your system needs per job rather than selling something off the shelf. That keeps turnaround reasonable. When a retrofit air handler needs a specific filter cabinet or a UV unit sized to a tight closet, we confirm the spec first and bring the right equipment, which is faster than a return trip.
See the difference
Before
After
Before
After
Before
AfterCommon Air Quality & Sanitizing Problems We See in Park Slope Homes
- Disconnected retrofit runs behind plaster. A flex run that separated at a joist bay blows cavity or attic air instead of conditioned air. Cleaning won’t fix it. The run has to be sealed and often insulated.
- Dead-leg ductwork in multi-unit conversions. A shut-off register in one apartment may no longer connect to anything live, so sanitizing treats the wrong branch while the source of the odor sits untouched in the dead leg.
- Condensation in uninsulated summer runs. Warm, moist air pushed through a poorly sealed and uninsulated retrofit run condensates, leaving damp interior surfaces that re-seed mold unless the run is insulated, not just cleaned.
- Heating-season debris on radiators and registers. The long heating season bakes dust onto cast-iron radiators and forced-air registers, and it recirculates every time the system runs. Spring pollen from Prospect Park and the street trees adds a heavy layer on top.
Pricing for Air Quality & Sanitizing in Park Slope, NY
Air quality work in Park Slope runs a wide range because the building stock does. A typical duct sanitizing treatment with a full system map and camera inspection runs $450 to $900, depending on how many runs are live and how much tracing is involved. UV light installation at the air handler typically runs $350 to $650 installed. A full mold treatment with sealing and insulation of one compromised run often runs $900 to $1,800, and the sealing work is usually the bulk of that. Filter and air purifier upgrades with Honeywell or Aprilaire products typically run $300 to $800, sized to your system. You get one flat price per system agreed before work starts, and the written estimate sets the final price. Estimates are free. Call (866) 937-8518 for yours.
We Also Serve Cities Near Park Slope
We work the neighborhoods around Park Slope too, including Prospect Heights, Clinton Hill, Williamsburg and Crown Heights. The housing stock is similar, so the approach is similar: trace the system, seal what’s broken, then treat. If you’re in one of those areas and want an air quality assessment, call (866) 937-8518 and we’ll talk through your system.
Serving Park Slope, NY – Our Local Coverage Area
We serve Park Slope and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Air Quality & Sanitizing in Park Slope
The smell returns because the source wasn’t the duct surface. In a retrofit run that has pulled apart behind plaster or stayed damp because it’s uninsulated, mold re-seeds as soon as the next humid stretch arrives. The durable fix is finding that run, sealing it and insulating it, then treating the surfaces. Call (866) 937-8518 for an exact quote. Estimates are free.
Yes, and that’s most of the ductwork in Park Slope brownstones. Retrofit runs in closets, soffits and joist bays can be reached and treated, though it sometimes means cutting a small access opening and patching plaster afterward. We trace the run with camera inspection first so the access is planned rather than exploratory.
Usually yes. In a converted two- or three-unit Park Slope rowhouse, each apartment tends to have its own decades-old patchwork of runs, so one floor’s system can be completely separate from another. We assess each unit on its own and quote per system. Call (866) 937-8518 to walk through what each floor needs.
Don’t jump to the highest rating you can find. Older retrofit air handlers and undersized returns often can’t move enough air through a dense filter, which stresses the blower and hurts comfort. A moderate MERV rating that fits your return, matched to what the system can actually pull, is usually the smarter call. We assess the air handler and return size and recommend from there.
It helps with what grows on the coil and the first stretch of duct, which is a real source of odor in Park Slope buildings where the coil sits in a tight closet. It won’t replace sealing a disconnected run or fixing the moisture that feeds mold. UV works best as one part of a fuller job: trace, seal, clean, then treat. Call (866) 937-8518 for an exact quote on your system.
If your Park Slope home has a musty smell that keeps coming back, or you want to know which of your retrofit duct runs are actually live, call us. One flat price per system, agreed before work starts, with before-and-after photos so you can see the result. Call (866) 937-8518 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Air Duct Cleaning Flatbush.